[PATCH 2/5] clk: meson: meson8b: use a separate clock table for Meson8

[Martin Blumenstingl]

The Meson8 SoC is slightly different compared to Meson8b and Meson8m2
because it does not have the glitch-free Mali GPU clock mux. For Meson8b
and Meson8m2 there are currently no known differences.

Add a separate clk_hw_onecell_data table for Meson8 so these differences
can be implemented. For now meson8_hw_onecell_data is a clone of our
existing meson8b_hw_onecell_data.

Signed-off-by: Martin Blumenstingl <***@googlemail.com>
---
drivers/clk/meson/meson8b.c | 203 ++++++++++++++++++++++++++++++++++--
1 file changed, 197 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 950d0e548c75..0b9353d8d4fd 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -1659,6 +1659,185 @@ static MESON_GATE(meson8b_ao_ahb_sram, HHI_GCLK_AO, 1);
static MESON_GATE(meson8b_ao_ahb_bus, HHI_GCLK_AO, 2);
static MESON_GATE(meson8b_ao_iface, HHI_GCLK_AO, 3);

+static struct clk_hw_onecell_data meson8_hw_onecell_data = {
+ .hws = {
+ [CLKID_XTAL] = &meson8b_xtal.hw,
+ [CLKID_PLL_FIXED] = &meson8b_fixed_pll.hw,
+ [CLKID_PLL_VID] = &meson8b_vid_pll.hw,
+ [CLKID_PLL_SYS] = &meson8b_sys_pll.hw,
+ [CLKID_FCLK_DIV2] = &meson8b_fclk_div2.hw,
+ [CLKID_FCLK_DIV3] = &meson8b_fclk_div3.hw,
+ [CLKID_FCLK_DIV4] = &meson8b_fclk_div4.hw,
+ [CLKID_FCLK_DIV5] = &meson8b_fclk_div5.hw,
+ [CLKID_FCLK_DIV7] = &meson8b_fclk_div7.hw,
+ [CLKID_CPUCLK] = &meson8b_cpu_clk.hw,
+ [CLKID_MPEG_SEL] = &meson8b_mpeg_clk_sel.hw,
+ [CLKID_MPEG_DIV] = &meson8b_mpeg_clk_div.hw,
+ [CLKID_CLK81] = &meson8b_clk81.hw,
+ [CLKID_DDR] = &meson8b_ddr.hw,
+ [CLKID_DOS] = &meson8b_dos.hw,
+ [CLKID_ISA] = &meson8b_isa.hw,
+ [CLKID_PL301] = &meson8b_pl301.hw,
+ [CLKID_PERIPHS] = &meson8b_periphs.hw,
+ [CLKID_SPICC] = &meson8b_spicc.hw,
+ [CLKID_I2C] = &meson8b_i2c.hw,
+ [CLKID_SAR_ADC] = &meson8b_sar_adc.hw,
+ [CLKID_SMART_CARD] = &meson8b_smart_card.hw,
+ [CLKID_RNG0] = &meson8b_rng0.hw,
+ [CLKID_UART0] = &meson8b_uart0.hw,
+ [CLKID_SDHC] = &meson8b_sdhc.hw,
+ [CLKID_STREAM] = &meson8b_stream.hw,
+ [CLKID_ASYNC_FIFO] = &meson8b_async_fifo.hw,
+ [CLKID_SDIO] = &meson8b_sdio.hw,
+ [CLKID_ABUF] = &meson8b_abuf.hw,
+ [CLKID_HIU_IFACE] = &meson8b_hiu_iface.hw,
+ [CLKID_ASSIST_MISC] = &meson8b_assist_misc.hw,
+ [CLKID_SPI] = &meson8b_spi.hw,
+ [CLKID_I2S_SPDIF] = &meson8b_i2s_spdif.hw,
+ [CLKID_ETH] = &meson8b_eth.hw,
+ [CLKID_DEMUX] = &meson8b_demux.hw,
+ [CLKID_AIU_GLUE] = &meson8b_aiu_glue.hw,
+ [CLKID_IEC958] = &meson8b_iec958.hw,
+ [CLKID_I2S_OUT] = &meson8b_i2s_out.hw,
+ [CLKID_AMCLK] = &meson8b_amclk.hw,
+ [CLKID_AIFIFO2] = &meson8b_aififo2.hw,
+ [CLKID_MIXER] = &meson8b_mixer.hw,
+ [CLKID_MIXER_IFACE] = &meson8b_mixer_iface.hw,
+ [CLKID_ADC] = &meson8b_adc.hw,
+ [CLKID_BLKMV] = &meson8b_blkmv.hw,
+ [CLKID_AIU] = &meson8b_aiu.hw,
+ [CLKID_UART1] = &meson8b_uart1.hw,
+ [CLKID_G2D] = &meson8b_g2d.hw,
+ [CLKID_USB0] = &meson8b_usb0.hw,
+ [CLKID_USB1] = &meson8b_usb1.hw,
+ [CLKID_RESET] = &meson8b_reset.hw,
+ [CLKID_NAND] = &meson8b_nand.hw,
+ [CLKID_DOS_PARSER] = &meson8b_dos_parser.hw,
+ [CLKID_USB] = &meson8b_usb.hw,
+ [CLKID_VDIN1] = &meson8b_vdin1.hw,
+ [CLKID_AHB_ARB0] = &meson8b_ahb_arb0.hw,
+ [CLKID_EFUSE] = &meson8b_efuse.hw,
+ [CLKID_BOOT_ROM] = &meson8b_boot_rom.hw,
+ [CLKID_AHB_DATA_BUS] = &meson8b_ahb_data_bus.hw,
+ [CLKID_AHB_CTRL_BUS] = &meson8b_ahb_ctrl_bus.hw,
+ [CLKID_HDMI_INTR_SYNC] = &meson8b_hdmi_intr_sync.hw,
+ [CLKID_HDMI_PCLK] = &meson8b_hdmi_pclk.hw,
+ [CLKID_USB1_DDR_BRIDGE] = &meson8b_usb1_ddr_bridge.hw,
+ [CLKID_USB0_DDR_BRIDGE] = &meson8b_usb0_ddr_bridge.hw,
+ [CLKID_MMC_PCLK] = &meson8b_mmc_pclk.hw,
+ [CLKID_DVIN] = &meson8b_dvin.hw,
+ [CLKID_UART2] = &meson8b_uart2.hw,
+ [CLKID_SANA] = &meson8b_sana.hw,
+ [CLKID_VPU_INTR] = &meson8b_vpu_intr.hw,
+ [CLKID_SEC_AHB_AHB3_BRIDGE] = &meson8b_sec_ahb_ahb3_bridge.hw,
+ [CLKID_CLK81_A9] = &meson8b_clk81_a9.hw,
+ [CLKID_VCLK2_VENCI0] = &meson8b_vclk2_venci0.hw,
+ [CLKID_VCLK2_VENCI1] = &meson8b_vclk2_venci1.hw,
+ [CLKID_VCLK2_VENCP0] = &meson8b_vclk2_vencp0.hw,
+ [CLKID_VCLK2_VENCP1] = &meson8b_vclk2_vencp1.hw,
+ [CLKID_GCLK_VENCI_INT] = &meson8b_gclk_venci_int.hw,
+ [CLKID_GCLK_VENCP_INT] = &meson8b_gclk_vencp_int.hw,
+ [CLKID_DAC_CLK] = &meson8b_dac_clk.hw,
+ [CLKID_AOCLK_GATE] = &meson8b_aoclk_gate.hw,
+ [CLKID_IEC958_GATE] = &meson8b_iec958_gate.hw,
+ [CLKID_ENC480P] = &meson8b_enc480p.hw,
+ [CLKID_RNG1] = &meson8b_rng1.hw,
+ [CLKID_GCLK_VENCL_INT] = &meson8b_gclk_vencl_int.hw,
+ [CLKID_VCLK2_VENCLMCC] = &meson8b_vclk2_venclmcc.hw,
+ [CLKID_VCLK2_VENCL] = &meson8b_vclk2_vencl.hw,
+ [CLKID_VCLK2_OTHER] = &meson8b_vclk2_other.hw,
+ [CLKID_EDP] = &meson8b_edp.hw,
+ [CLKID_AO_MEDIA_CPU] = &meson8b_ao_media_cpu.hw,
+ [CLKID_AO_AHB_SRAM] = &meson8b_ao_ahb_sram.hw,
+ [CLKID_AO_AHB_BUS] = &meson8b_ao_ahb_bus.hw,
+ [CLKID_AO_IFACE] = &meson8b_ao_iface.hw,
+ [CLKID_MPLL0] = &meson8b_mpll0.hw,
+ [CLKID_MPLL1] = &meson8b_mpll1.hw,
+ [CLKID_MPLL2] = &meson8b_mpll2.hw,
+ [CLKID_MPLL0_DIV] = &meson8b_mpll0_div.hw,
+ [CLKID_MPLL1_DIV] = &meson8b_mpll1_div.hw,
+ [CLKID_MPLL2_DIV] = &meson8b_mpll2_div.hw,
+ [CLKID_CPU_IN_SEL] = &meson8b_cpu_in_sel.hw,
+ [CLKID_CPU_IN_DIV2] = &meson8b_cpu_in_div2.hw,
+ [CLKID_CPU_IN_DIV3] = &meson8b_cpu_in_div3.hw,
+ [CLKID_CPU_SCALE_DIV] = &meson8b_cpu_scale_div.hw,
+ [CLKID_CPU_SCALE_OUT_SEL] = &meson8b_cpu_scale_out_sel.hw,
+ [CLKID_MPLL_PREDIV] = &meson8b_mpll_prediv.hw,
+ [CLKID_FCLK_DIV2_DIV] = &meson8b_fclk_div2_div.hw,
+ [CLKID_FCLK_DIV3_DIV] = &meson8b_fclk_div3_div.hw,
+ [CLKID_FCLK_DIV4_DIV] = &meson8b_fclk_div4_div.hw,
+ [CLKID_FCLK_DIV5_DIV] = &meson8b_fclk_div5_div.hw,
+ [CLKID_FCLK_DIV7_DIV] = &meson8b_fclk_div7_div.hw,
+ [CLKID_NAND_SEL] = &meson8b_nand_clk_sel.hw,
+ [CLKID_NAND_DIV] = &meson8b_nand_clk_div.hw,
+ [CLKID_NAND_CLK] = &meson8b_nand_clk_gate.hw,
+ [CLKID_PLL_FIXED_DCO] = &meson8b_fixed_pll_dco.hw,
+ [CLKID_HDMI_PLL_DCO] = &meson8b_hdmi_pll_dco.hw,
+ [CLKID_PLL_SYS_DCO] = &meson8b_sys_pll_dco.hw,
+ [CLKID_CPU_CLK_DIV2] = &meson8b_cpu_clk_div2.hw,
+ [CLKID_CPU_CLK_DIV3] = &meson8b_cpu_clk_div3.hw,
+ [CLKID_CPU_CLK_DIV4] = &meson8b_cpu_clk_div4.hw,
+ [CLKID_CPU_CLK_DIV5] = &meson8b_cpu_clk_div5.hw,
+ [CLKID_CPU_CLK_DIV6] = &meson8b_cpu_clk_div6.hw,
+ [CLKID_CPU_CLK_DIV7] = &meson8b_cpu_clk_div7.hw,
+ [CLKID_CPU_CLK_DIV8] = &meson8b_cpu_clk_div8.hw,
+ [CLKID_ABP_SEL] = &meson8b_abp_clk_sel.hw,
+ [CLKID_ABP] = &meson8b_abp_clk_gate.hw,
+ [CLKID_PERIPH_SEL] = &meson8b_periph_clk_sel.hw,
+ [CLKID_PERIPH] = &meson8b_periph_clk_gate.hw,
+ [CLKID_AXI_SEL] = &meson8b_axi_clk_sel.hw,
+ [CLKID_AXI] = &meson8b_axi_clk_gate.hw,
+ [CLKID_L2_DRAM_SEL] = &meson8b_l2_dram_clk_sel.hw,
+ [CLKID_L2_DRAM] = &meson8b_l2_dram_clk_gate.hw,
+ [CLKID_HDMI_PLL_LVDS_OUT] = &meson8b_hdmi_pll_lvds_out.hw,
+ [CLKID_HDMI_PLL_HDMI_OUT] = &meson8b_hdmi_pll_hdmi_out.hw,
+ [CLKID_VID_PLL_IN_SEL] = &meson8b_vid_pll_in_sel.hw,
+ [CLKID_VID_PLL_IN_EN] = &meson8b_vid_pll_in_en.hw,
+ [CLKID_VID_PLL_PRE_DIV] = &meson8b_vid_pll_pre_div.hw,
+ [CLKID_VID_PLL_POST_DIV] = &meson8b_vid_pll_post_div.hw,
+ [CLKID_VID_PLL_FINAL_DIV] = &meson8b_vid_pll_final_div.hw,
+ [CLKID_VCLK_IN_SEL] = &meson8b_vclk_in_sel.hw,
+ [CLKID_VCLK_IN_EN] = &meson8b_vclk_in_en.hw,
+ [CLKID_VCLK_DIV1] = &meson8b_vclk_div1_gate.hw,
+ [CLKID_VCLK_DIV2_DIV] = &meson8b_vclk_div2_div.hw,
+ [CLKID_VCLK_DIV2] = &meson8b_vclk_div2_div_gate.hw,
+ [CLKID_VCLK_DIV4_DIV] = &meson8b_vclk_div4_div.hw,
+ [CLKID_VCLK_DIV4] = &meson8b_vclk_div4_div_gate.hw,
+ [CLKID_VCLK_DIV6_DIV] = &meson8b_vclk_div6_div.hw,
+ [CLKID_VCLK_DIV6] = &meson8b_vclk_div6_div_gate.hw,
+ [CLKID_VCLK_DIV12_DIV] = &meson8b_vclk_div12_div.hw,
+ [CLKID_VCLK_DIV12] = &meson8b_vclk_div12_div_gate.hw,
+ [CLKID_VCLK2_IN_SEL] = &meson8b_vclk2_in_sel.hw,
+ [CLKID_VCLK2_IN_EN] = &meson8b_vclk2_clk_in_en.hw,
+ [CLKID_VCLK2_DIV1] = &meson8b_vclk2_div1_gate.hw,
+ [CLKID_VCLK2_DIV2_DIV] = &meson8b_vclk2_div2_div.hw,
+ [CLKID_VCLK2_DIV2] = &meson8b_vclk2_div2_div_gate.hw,
+ [CLKID_VCLK2_DIV4_DIV] = &meson8b_vclk2_div4_div.hw,
+ [CLKID_VCLK2_DIV4] = &meson8b_vclk2_div4_div_gate.hw,
+ [CLKID_VCLK2_DIV6_DIV] = &meson8b_vclk2_div6_div.hw,
+ [CLKID_VCLK2_DIV6] = &meson8b_vclk2_div6_div_gate.hw,
+ [CLKID_VCLK2_DIV12_DIV] = &meson8b_vclk2_div12_div.hw,
+ [CLKID_VCLK2_DIV12] = &meson8b_vclk2_div12_div_gate.hw,
+ [CLKID_CTS_ENCT_SEL] = &meson8b_cts_enct_sel.hw,
+ [CLKID_CTS_ENCT] = &meson8b_cts_enct.hw,
+ [CLKID_CTS_ENCP_SEL] = &meson8b_cts_encp_sel.hw,
+ [CLKID_CTS_ENCP] = &meson8b_cts_encp.hw,
+ [CLKID_CTS_ENCI_SEL] = &meson8b_cts_enci_sel.hw,
+ [CLKID_CTS_ENCI] = &meson8b_cts_enci.hw,
+ [CLKID_HDMI_TX_PIXEL_SEL] = &meson8b_hdmi_tx_pixel_sel.hw,
+ [CLKID_HDMI_TX_PIXEL] = &meson8b_hdmi_tx_pixel.hw,
+ [CLKID_CTS_ENCL_SEL] = &meson8b_cts_encl_sel.hw,
+ [CLKID_CTS_ENCL] = &meson8b_cts_encl.hw,
+ [CLKID_CTS_VDAC0_SEL] = &meson8b_cts_vdac0_sel.hw,
+ [CLKID_CTS_VDAC0] = &meson8b_cts_vdac0.hw,
+ [CLKID_HDMI_SYS_SEL] = &meson8b_hdmi_sys_sel.hw,
+ [CLKID_HDMI_SYS_DIV] = &meson8b_hdmi_sys_div.hw,
+ [CLKID_HDMI_SYS] = &meson8b_hdmi_sys.hw,
+ [CLK_NR_CLKS] = NULL,
+ },
+ .num = CLK_NR_CLKS,
+};
+
static struct clk_hw_onecell_data meson8b_hw_onecell_data = {
.hws = {
[CLKID_XTAL] = &meson8b_xtal.hw,
@@ -2132,7 +2311,6 @@ static int meson8b_cpu_clk_notifier_cb(struct notifier_block *nb,

static struct meson8b_nb_data meson8b_cpu_nb_data = {
.nb.notifier_call = meson8b_cpu_clk_notifier_cb,
- .onecell_data = &meson8b_hw_onecell_data,
};

static const struct regmap_config clkc_regmap_config = {
@@ -2141,7 +2319,8 @@ static const struct regmap_config clkc_regmap_config = {
.reg_stride = 4,
};

-static void __init meson8b_clkc_init(struct device_node *np)
+static void __init meson8b_clkc_init_common(struct device_node *np,
+ struct clk_hw_onecell_data *clk_hw_onecell_data)
{
struct meson8b_clk_reset *rstc;
const char *notifier_clk_name;
@@ -2192,14 +2371,16 @@ static void __init meson8b_clkc_init(struct device_node *np)
*/
for (i = CLKID_XTAL; i < CLK_NR_CLKS; i++) {
/* array might be sparse */
- if (!meson8b_hw_onecell_data.hws[i])
+ if (!clk_hw_onecell_data->hws[i])
continue;

- ret = clk_hw_register(NULL, meson8b_hw_onecell_data.hws[i]);
+ ret = clk_hw_register(NULL, clk_hw_onecell_data->hws[i]);
if (ret)
return;
}

+ meson8b_cpu_nb_data.onecell_data = clk_hw_onecell_data;
+
/*
* FIXME we shouldn't program the muxes in notifier handlers. The
* tricky programming sequence will be handled by the forthcoming
@@ -2215,13 +2396,23 @@ static void __init meson8b_clkc_init(struct device_node *np)
}

ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get,
- &meson8b_hw_onecell_data);
+ clk_hw_onecell_data);
if (ret)
pr_err("%s: failed to register clock provider\n", __func__);
}

+static void __init meson8_clkc_init(struct device_node *np)
+{
+ return meson8b_clkc_init_common(np, &meson8_hw_onecell_data);
+}
+
+static void __init meson8b_clkc_init(struct device_node *np)
+{
+ return meson8b_clkc_init_common(np, &meson8b_hw_onecell_data);
+}
+
CLK_OF_DECLARE_DRIVER(meson8_clkc, "amlogic,meson8-clkc",
- meson8b_clkc_init);
+ meson8_clkc_init);
CLK_OF_DECLARE_DRIVER(meson8b_clkc, "amlogic,meson8b-clkc",
meson8b_clkc_init);
CLK_OF_DECLARE_DRIVER(meson8m2_clkc, "amlogic,meson8m2-clkc",

[Martin Blumenstingl]

Add the GPU clock tree on Meson8, Meson8b and Meson8m2.

The GPU clock tree on Meson8b and Meson8m2 is almost identical to the
one one GXBB:
- there's a glitch-free mux at HHI_MALI_CLK_CNTL[31]
- there are two identical parents for this mux: mali_0 and mali_1, each
with a gate, divider and mux
- the parents of mali_0_sel and mali_1_sel are identical to GXBB except
there's no GP0_PLL on these 32-bit SoCs

Meson8 is different because it does not have the glitch-free mux.
Instead if only has the mali_0 clock tree. The parents of mali_0_sel are
identical to the ones on Meson8b and Meson8m2.

Signed-off-by: Martin Blumenstingl <***@googlemail.com>
---
drivers/clk/meson/meson8b.c | 146 ++++++++++++++++++++++++++++++++++++
drivers/clk/meson/meson8b.h | 9 ++-
2 files changed, 154 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 0b9353d8d4fd..748552c5f6c8 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -1573,6 +1573,135 @@ static struct clk_regmap meson8b_hdmi_sys = {
},
};

+/*
+ * The MALI IP is clocked by two identical clocks (mali_0 and mali_1)
+ * muxed by a glitch-free switch on Meson8b and Meson8m2. Meson8 only
+ * has mali_0 and no glitch-free mux.
+ */
+static const char * const meson8b_mali_0_1_parent_names[] = {
+ "xtal", "mpll2", "mpll1", "fclk_div7", "fclk_div4", "fclk_div3",
+ "fclk_div5"
+};
+
+static u32 meson8b_mali_0_1_mux_table[] = { 0, 2, 3, 4, 5, 6, 7 };
+
+static struct clk_regmap meson8b_mali_0_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_MALI_CLK_CNTL,
+ .mask = 0x7,
+ .shift = 9,
+ .table = meson8b_mali_0_1_mux_table,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mali_0_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_names = meson8b_mali_0_1_parent_names,
+ .num_parents = ARRAY_SIZE(meson8b_mali_0_1_parent_names),
+ /*
+ * Don't propagate rate changes up because the only changeable
+ * parents are mpll1 and mpll2 but we need those for audio and
+ * RGMII (Ethernet). We don't want to change the audio or
+ * Ethernet clocks when setting the GPU frequency.
+ */
+ .flags = 0,
+ },
+};
+
+static struct clk_regmap meson8b_mali_0_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_MALI_CLK_CNTL,
+ .shift = 0,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mali_0_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_names = (const char *[]){ "mali_0_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap meson8b_mali_0 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_MALI_CLK_CNTL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mali_0",
+ .ops = &clk_regmap_gate_ops,
+ .parent_names = (const char *[]){ "mali_0_div" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap meson8b_mali_1_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_MALI_CLK_CNTL,
+ .mask = 0x7,
+ .shift = 25,
+ .table = meson8b_mali_0_1_mux_table,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mali_1_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_names = meson8b_mali_0_1_parent_names,
+ .num_parents = ARRAY_SIZE(meson8b_mali_0_1_parent_names),
+ /*
+ * Don't propagate rate changes up because the only changeable
+ * parents are mpll1 and mpll2 but we need those for audio and
+ * RGMII (Ethernet). We don't want to change the audio or
+ * Ethernet clocks when setting the GPU frequency.
+ */
+ .flags = 0,
+ },
+};
+
+static struct clk_regmap meson8b_mali_1_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_MALI_CLK_CNTL,
+ .shift = 16,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mali_1_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_names = (const char *[]){ "mali_1_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap meson8b_mali_1 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_MALI_CLK_CNTL,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mali_1",
+ .ops = &clk_regmap_gate_ops,
+ .parent_names = (const char *[]){ "mali_1_div" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap meson8b_mali = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_MALI_CLK_CNTL,
+ .mask = 1,
+ .shift = 31,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mali",
+ .ops = &clk_regmap_mux_ops,
+ .parent_names = (const char *[]){ "mali_0", "mali_1" },
+ .num_parents = 2,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
/* Everything Else (EE) domain gates */

static MESON_GATE(meson8b_ddr, HHI_GCLK_MPEG0, 0);
@@ -1833,6 +1962,9 @@ static struct clk_hw_onecell_data meson8_hw_onecell_data = {
[CLKID_HDMI_SYS_SEL] = &meson8b_hdmi_sys_sel.hw,
[CLKID_HDMI_SYS_DIV] = &meson8b_hdmi_sys_div.hw,
[CLKID_HDMI_SYS] = &meson8b_hdmi_sys.hw,
+ [CLKID_MALI_0_SEL] = &meson8b_mali_0_sel.hw,
+ [CLKID_MALI_0_DIV] = &meson8b_mali_0_div.hw,
+ [CLKID_MALI] = &meson8b_mali_0.hw,
[CLK_NR_CLKS] = NULL,
},
.num = CLK_NR_CLKS,
@@ -2012,6 +2144,13 @@ static struct clk_hw_onecell_data meson8b_hw_onecell_data = {
[CLKID_HDMI_SYS_SEL] = &meson8b_hdmi_sys_sel.hw,
[CLKID_HDMI_SYS_DIV] = &meson8b_hdmi_sys_div.hw,
[CLKID_HDMI_SYS] = &meson8b_hdmi_sys.hw,
+ [CLKID_MALI_0_SEL] = &meson8b_mali_0_sel.hw,
+ [CLKID_MALI_0_DIV] = &meson8b_mali_0_div.hw,
+ [CLKID_MALI_0] = &meson8b_mali_0.hw,
+ [CLKID_MALI_1_SEL] = &meson8b_mali_1_sel.hw,
+ [CLKID_MALI_1_DIV] = &meson8b_mali_1_div.hw,
+ [CLKID_MALI_1] = &meson8b_mali_1.hw,
+ [CLKID_MALI] = &meson8b_mali.hw,
[CLK_NR_CLKS] = NULL,
},
.num = CLK_NR_CLKS,
@@ -2167,6 +2306,13 @@ static struct clk_regmap *const meson8b_clk_regmaps[] = {
&meson8b_hdmi_sys_sel,
&meson8b_hdmi_sys_div,
&meson8b_hdmi_sys,
+ &meson8b_mali_0_sel,
+ &meson8b_mali_0_div,
+ &meson8b_mali_0,
+ &meson8b_mali_1_sel,
+ &meson8b_mali_1_div,
+ &meson8b_mali_1,
+ &meson8b_mali,
};

static const struct meson8b_clk_reset_line {
diff --git a/drivers/clk/meson/meson8b.h b/drivers/clk/meson/meson8b.h
index 87fba739af81..f212e2304ff5 100644
--- a/drivers/clk/meson/meson8b.h
+++ b/drivers/clk/meson/meson8b.h
@@ -33,6 +33,7 @@
#define HHI_VID_CLK_CNTL2 0x194 /* 0x65 offset in data sheet */
#define HHI_VID_DIVIDER_CNTL 0x198 /* 0x66 offset in data sheet */
#define HHI_SYS_CPU_CLK_CNTL0 0x19c /* 0x67 offset in data sheet */
+#define HHI_MALI_CLK_CNTL 0x1b0 /* 0x6c offset in data sheet */
#define HHI_HDMI_CLK_CNTL 0x1cc /* 0x73 offset in data sheet */
#define HHI_NAND_CLK_CNTL 0x25c /* 0x97 offset in data sheet */
#define HHI_MPLL_CNTL 0x280 /* 0xa0 offset in data sheet */
@@ -139,8 +140,14 @@
#define CLKID_HDMI_SYS_SEL 172
#define CLKID_HDMI_SYS_DIV 173
#define CLKID_HDMI_SYS 174
+#define CLKID_MALI_0_SEL 175
+#define CLKID_MALI_0_DIV 176
+#define CLKID_MALI_0 177
+#define CLKID_MALI_1_SEL 178
+#define CLKID_MALI_1_DIV 179
+#define CLKID_MALI_1 180

-#define CLK_NR_CLKS 175
+#define CLK_NR_CLKS 181

/*
* include the CLKID and RESETID that have

[Martin Blumenstingl]

Add the Mali-450 GPU and it's OPP table for the Meson8 and Meson8m2 (the
latter inherits meson8.dtsi).
These SoCs have a Mali-450 GPU with six pixel processors. The OPP table
is taken from the 3.10 vendor kernel which uses the following table:
FCLK_DEV7 | 1, /* 182.1 Mhz */
FCLK_DEV4 | 1, /* 318.7 Mhz */
FCLK_DEV3 | 1, /* 425 Mhz */
FCLK_DEV5 | 0, /* 510 Mhz */
FCLK_DEV4 | 0, /* 637.5 Mhz */
This describes the mux (FCLK_DEVx) and a 0-based divider in the clock
controller. "FCLK" is "fixed_pll" which is running at 2550MHz.
The "turbo" setting is described by "turbo_clock = 4" where 4 is the
index of the table above.

Signed-off-by: Martin Blumenstingl <***@googlemail.com>
---
arch/arm/boot/dts/meson8.dtsi | 58 +++++++++++++++++++++++++++++++++++
1 file changed, 58 insertions(+)

diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index 3fd8260eba92..1ea5a36c5040 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -166,6 +166,32 @@
};
};

+ gpu_opp_table: gpu-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-182150000 {
+ opp-hz = /bits/ 64 <182150000>;
+ opp-microvolt = <1150000>;
+ };
+ opp-318750000 {
+ opp-hz = /bits/ 64 <318750000>;
+ opp-microvolt = <1150000>;
+ };
+ opp-425000000 {
+ opp-hz = /bits/ 64 <425000000>;
+ opp-microvolt = <1150000>;
+ };
+ opp-510000000 {
+ opp-hz = /bits/ 64 <510000000>;
+ opp-microvolt = <1150000>;
+ };
+ opp-637500000 {
+ opp-hz = /bits/ 64 <637500000>;
+ opp-microvolt = <1150000>;
+ turbo-mode;
+ };
+ };
+
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
@@ -208,6 +234,38 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xd0000000 0x200000>;
+
+ mali: ***@c0000 {
+ compatible = "amlogic,meson8-mali", "arm,mali-450";
+ reg = <0xc0000 0x40000>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp", "gpmmu", "pp", "pmu",
+ "pp0", "ppmmu0", "pp1", "ppmmu1",
+ "pp2", "ppmmu2", "pp4", "ppmmu4",
+ "pp5", "ppmmu5", "pp6", "ppmmu6";
+ resets = <&reset RESET_MALI>;
+ clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+ clock-names = "bus", "core";
+ operating-points-v2 = <&gpu_opp_table>;
+ switch-delay = <0xffff>;
+ };
};
}; /* end of / */

[Martin Blumenstingl]

Add the Mali-450 GPU and it's OPP table for Meson8. The GPU uses two
pixel processors in this configuration. The OPP table is taken from the
3.10 vendor kernel which uses the following table:
FCLK_DEV5 | 1, /* 255 Mhz */
FCLK_DEV7 | 0, /* 364 Mhz */
FCLK_DEV3 | 1, /* 425 Mhz */
FCLK_DEV5 | 0, /* 510 Mhz */
FCLK_DEV4 | 0, /* 637.5 Mhz */
This describes the mux (FCLK_DEVx) and a 0-based divider in the clock
controller. "FCLK" is "fixed_pll" which is running at 2550MHz.
The "turbo" setting is described by "turbo_clock = 4" where 4 is the
index of the table above.

Signed-off-by: Martin Blumenstingl <***@googlemail.com>
---
arch/arm/boot/dts/meson8b.dtsi | 46 ++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)

diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 5d036842c355..dd498e681939 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -158,6 +158,32 @@
};
};

+ gpu_opp_table: gpu-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-255000000 {
+ opp-hz = /bits/ 64 <255000000>;
+ opp-microvolt = <1150000>;
+ };
+ opp-364300000 {
+ opp-hz = /bits/ 64 <364300000>;
+ opp-microvolt = <1150000>;
+ };
+ opp-425000000 {
+ opp-hz = /bits/ 64 <425000000>;
+ opp-microvolt = <1150000>;
+ };
+ opp-510000000 {
+ opp-hz = /bits/ 64 <510000000>;
+ opp-microvolt = <1150000>;
+ };
+ opp-637500000 {
+ opp-hz = /bits/ 64 <637500000>;
+ opp-microvolt = <1150000>;
+ turbo-mode;
+ };
+ };
+
pmu {
compatible = "arm,cortex-a5-pmu";
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
@@ -185,6 +211,26 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xd0000000 0x200000>;
+
+ mali: ***@c0000 {
+ compatible = "amlogic,meson8b-mali", "arm,mali-450";
+ reg = <0xc0000 0x40000>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp", "gpmmu", "pp", "pmu",
+ "pp0", "ppmmu0", "pp1", "ppmmu1";
+ resets = <&reset RESET_MALI>;
+ clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+ clock-names = "bus", "core";
+ operating-points-v2 = <&gpu_opp_table>;
+ switch-delay = <0xffff>;
+ };
};
}; /* end of / */

[Martin Blumenstingl]

Add a compatible string for the Mali-450 GPU on Amlogic Meson8 and
Meson8b SoCs. Meson8 uses an "MP6" variant with six pixel processors
while Meson8b (as cost-reduced SoC) uses an "MP2" variant with two pixel
processors. Both have a reset line to bring the GPU into a well-defined
state.

Signed-off-by: Martin Blumenstingl <***@googlemail.com>
---
Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
index 63cd91176a68..efa1077a90cb 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
@@ -12,6 +12,8 @@ Required properties:
+ allwinner,sun7i-a20-mali
+ allwinner,sun8i-h3-mali
+ allwinner,sun50i-h5-mali
+ + amlogic,meson8-mali
+ + amlogic,meson8b-mali
+ amlogic,meson-gxbb-mali
+ amlogic,meson-gxl-mali
+ rockchip,rk3036-mali
@@ -77,6 +79,10 @@ to specify one more vendor-specific compatible, among:
Required properties:
* resets: phandle to the reset line for the GPU

+ - amlogic,meson8-mali and amlogic,meson8b-mali
+ Required properties:
+ * resets: phandle to the reset line for the GPU
+
- Rockchip variants:
Required properties:
* resets: phandle to the reset line for the GPU