[PATCH v3 1/2] drm/vc4: Fix negative X/Y positioning on SAND planes

[Boris Brezillon]

Commit 3e407417b192 ("drm/vc4: Fix X/Y positioning of planes using
T_TILES modifier") fixed the problem with T_TILES format, but left
things in a non-working state for SAND formats. Address that now.

Signed-off-by: Boris Brezillon <***@bootlin.com>
---
Changes in v2:
- Stop using ->crtc_x for intra-tile X offsets

Changes in v2:
- New patch
---
drivers/gpu/drm/vc4/vc4_plane.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)

diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c
index 75db62cbe468..fb1214b91a25 100644
--- a/drivers/gpu/drm/vc4/vc4_plane.c
+++ b/drivers/gpu/drm/vc4/vc4_plane.c
@@ -595,6 +595,7 @@ static int vc4_plane_mode_set(struct drm_plane *plane,
case DRM_FORMAT_MOD_BROADCOM_SAND128:
case DRM_FORMAT_MOD_BROADCOM_SAND256: {
uint32_t param = fourcc_mod_broadcom_param(fb->modifier);
+ u32 tile_w, tile, x_off, pix_per_tile;

/* Column-based NV12 or RGBA.
*/
@@ -614,12 +615,15 @@ static int vc4_plane_mode_set(struct drm_plane *plane,
switch (base_format_mod) {
case DRM_FORMAT_MOD_BROADCOM_SAND64:
tiling = SCALER_CTL0_TILING_64B;
+ tile_w = 64;
break;
case DRM_FORMAT_MOD_BROADCOM_SAND128:
tiling = SCALER_CTL0_TILING_128B;
+ tile_w = 128;
break;
case DRM_FORMAT_MOD_BROADCOM_SAND256:
tiling = SCALER_CTL0_TILING_256B_OR_T;
+ tile_w = 256;
break;
default:
break;
@@ -630,6 +634,23 @@ static int vc4_plane_mode_set(struct drm_plane *plane,
return -EINVAL;
}

+ pix_per_tile = tile_w / fb->format->cpp[0];
+ tile = vc4_state->src_x / pix_per_tile;
+ x_off = vc4_state->src_x % pix_per_tile;
+
+ /* Adjust the base pointer to the first pixel to be scanned
+ * out.
+ */
+ for (i = 0; i < num_planes; i++) {
+ vc4_state->offsets[i] += param * tile_w * tile;
+ vc4_state->offsets[i] += vc4_state->src_y /
+ (i ? v_subsample : 1) *
+ tile_w;
+ vc4_state->offsets[i] += x_off /
+ (i ? h_subsample : 1) *
+ fb->format->cpp[i];
+ }
+
pitch0 = VC4_SET_FIELD(param, SCALER_TILE_HEIGHT);
break;
}

[Boris Brezillon]

Add support for X/Y reflection when the plane is using linear or
T-tiled formats. X/Y reflection hasn't been tested on SAND formats, so
we reject them until proper testing/debugging has been done.

Signed-off-by: Boris Brezillon <***@bootlin.com>
Reviewed-by: Eric Anholt <***@anholt.net>
---
Changes in v3:
- Add Eric's R-b

Changes in v2:
- Use drm_rotation_simplify() to support ROTATE_180
- Support rotation/reflection on SAND formats
---
drivers/gpu/drm/vc4/vc4_plane.c | 59 ++++++++++++++++++++++++++-------
1 file changed, 47 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c
index fb1214b91a25..283abd7d1e9b 100644
--- a/drivers/gpu/drm/vc4/vc4_plane.c
+++ b/drivers/gpu/drm/vc4/vc4_plane.c
@@ -492,8 +492,9 @@ static int vc4_plane_mode_set(struct drm_plane *plane,
bool mix_plane_alpha;
bool covers_screen;
u32 scl0, scl1, pitch0;
- u32 tiling;
+ u32 tiling, src_y;
u32 hvs_format = format->hvs;
+ unsigned int rotation;
int ret, i;

if (vc4_state->dlist_initialized)
@@ -520,6 +521,16 @@ static int vc4_plane_mode_set(struct drm_plane *plane,
h_subsample = drm_format_horz_chroma_subsampling(format->drm);
v_subsample = drm_format_vert_chroma_subsampling(format->drm);

+ rotation = drm_rotation_simplify(state->rotation,
+ DRM_MODE_ROTATE_0 |
+ DRM_MODE_REFLECT_X |
+ DRM_MODE_REFLECT_Y);
+
+ /* We must point to the last line when Y reflection is enabled. */
+ src_y = vc4_state->src_y;
+ if (rotation & DRM_MODE_REFLECT_Y)
+ src_y += vc4_state->src_h[0] - 1;
+
switch (base_format_mod) {
case DRM_FORMAT_MOD_LINEAR:
tiling = SCALER_CTL0_TILING_LINEAR;
@@ -529,9 +540,10 @@ static int vc4_plane_mode_set(struct drm_plane *plane,
* out.
*/
for (i = 0; i < num_planes; i++) {
- vc4_state->offsets[i] += vc4_state->src_y /
+ vc4_state->offsets[i] += src_y /
(i ? v_subsample : 1) *
fb->pitches[i];
+
vc4_state->offsets[i] += vc4_state->src_x /
(i ? h_subsample : 1) *
fb->format->cpp[i];
@@ -557,22 +569,38 @@ static int vc4_plane_mode_set(struct drm_plane *plane,
u32 tiles_w = fb->pitches[0] >> (tile_size_shift - tile_h_shift);
u32 tiles_l = vc4_state->src_x >> tile_w_shift;
u32 tiles_r = tiles_w - tiles_l;
- u32 tiles_t = vc4_state->src_y >> tile_h_shift;
+ u32 tiles_t = src_y >> tile_h_shift;
/* Intra-tile offsets, which modify the base address (the
* SCALER_PITCH0_TILE_Y_OFFSET tells HVS how to walk from that
* base address).
*/
- u32 tile_y = (vc4_state->src_y >> 4) & 1;
- u32 subtile_y = (vc4_state->src_y >> 2) & 3;
- u32 utile_y = vc4_state->src_y & 3;
+ u32 tile_y = (src_y >> 4) & 1;
+ u32 subtile_y = (src_y >> 2) & 3;
+ u32 utile_y = src_y & 3;
u32 x_off = vc4_state->src_x & tile_w_mask;
- u32 y_off = vc4_state->src_y & tile_h_mask;
+ u32 y_off = src_y & tile_h_mask;
+
+ /* When Y reflection is requested we must set the
+ * SCALER_PITCH0_TILE_LINE_DIR flag to tell HVS that all lines
+ * after the initial one should be fetched in descending order,
+ * which makes sense since we start from the last line and go
+ * backward.
+ * Don't know why we need y_off = max_y_off - y_off, but it's
+ * definitely required (I guess it's also related to the "going
+ * backward" situation).
+ */
+ if (rotation & DRM_MODE_REFLECT_Y) {
+ y_off = tile_h_mask - y_off;
+ pitch0 = SCALER_PITCH0_TILE_LINE_DIR;
+ } else {
+ pitch0 = 0;
+ }

tiling = SCALER_CTL0_TILING_256B_OR_T;
- pitch0 = (VC4_SET_FIELD(x_off, SCALER_PITCH0_SINK_PIX) |
- VC4_SET_FIELD(y_off, SCALER_PITCH0_TILE_Y_OFFSET) |
- VC4_SET_FIELD(tiles_l, SCALER_PITCH0_TILE_WIDTH_L) |
- VC4_SET_FIELD(tiles_r, SCALER_PITCH0_TILE_WIDTH_R));
+ pitch0 |= (VC4_SET_FIELD(x_off, SCALER_PITCH0_SINK_PIX) |
+ VC4_SET_FIELD(y_off, SCALER_PITCH0_TILE_Y_OFFSET) |
+ VC4_SET_FIELD(tiles_l, SCALER_PITCH0_TILE_WIDTH_L) |
+ VC4_SET_FIELD(tiles_r, SCALER_PITCH0_TILE_WIDTH_R));
vc4_state->offsets[0] += tiles_t * (tiles_w << tile_size_shift);
vc4_state->offsets[0] += subtile_y << 8;
vc4_state->offsets[0] += utile_y << 4;
@@ -643,7 +671,7 @@ static int vc4_plane_mode_set(struct drm_plane *plane,
*/
for (i = 0; i < num_planes; i++) {
vc4_state->offsets[i] += param * tile_w * tile;
- vc4_state->offsets[i] += vc4_state->src_y /
+ vc4_state->offsets[i] += src_y /
(i ? v_subsample : 1) *
tile_w;
vc4_state->offsets[i] += x_off /
@@ -664,6 +692,8 @@ static int vc4_plane_mode_set(struct drm_plane *plane,
/* Control word */
vc4_dlist_write(vc4_state,
SCALER_CTL0_VALID |
+ (rotation & DRM_MODE_REFLECT_X ? SCALER_CTL0_HFLIP : 0) |
+ (rotation & DRM_MODE_REFLECT_Y ? SCALER_CTL0_VFLIP : 0) |
VC4_SET_FIELD(SCALER_CTL0_RGBA_EXPAND_ROUND, SCALER_CTL0_RGBA_EXPAND) |
(format->pixel_order << SCALER_CTL0_ORDER_SHIFT) |
(hvs_format << SCALER_CTL0_PIXEL_FORMAT_SHIFT) |
@@ -1144,6 +1174,11 @@ struct drm_plane *vc4_plane_init(struct drm_device *dev,
drm_plane_helper_add(plane, &vc4_plane_helper_funcs);

drm_plane_create_alpha_property(plane);
+ drm_plane_create_rotation_property(plane, DRM_MODE_ROTATE_0,
+ DRM_MODE_ROTATE_0 |
+ DRM_MODE_ROTATE_180 |
+ DRM_MODE_REFLECT_X |
+ DRM_MODE_REFLECT_Y);

return plane;
}

[Eric Anholt]

Post by Boris Brezillon
Commit 3e407417b192 ("drm/vc4: Fix X/Y positioning of planes using
T_TILES modifier") fixed the problem with T_TILES format, but left
things in a non-working state for SAND formats. Address that now.

Reviewed-by: Eric Anholt <***@anholt.net>

[Boris Brezillon]

On Fri, 7 Dec 2018 09:36:05 +0100

Post by Boris Brezillon
Commit 3e407417b192 ("drm/vc4: Fix X/Y positioning of planes using
T_TILES modifier") fixed the problem with T_TILES format, but left
things in a non-working state for SAND formats. Address that now.

Series queued to drm-misc-next.